Sometimes. A learner’s strengths can compensate for a weakness only when the applicable assessment rules allow it. A weighted mark scheme may permit a pass on the overall total. A best-fit rubric may ask for a judgement about the work as a whole. Other assessments require every criterion, or a specified minimum in a particular area, to be met.

Start with the rules for the assessment and learner in front of you—not a general preference for averaging marks or counting criteria. The example below shows why the distinction matters.

One piece of work, three possible decisions

Imagine a learner has been asked to review information about a supplier and make a recommendation. The fictional assessment considers three areas: identifying relevant factors, making a recommendation and explaining the reasons for it.

The learner’s submission shows the following:

  • Identifying factors: identifies four of five relevant factors; data protection is omitted.
  • Recommendation: proposes an option that addresses four of the five factors.
  • Reasoning: gives relevant reasons for the choice in relation to cost and delivery, but does not explain how the other factors affected the decision.

These are fictional assessment rules, not a template for a particular qualification. In each case, assume the assessor has checked the complete submission and the applicable materials.

1. A weighted mark scheme

Suppose the published scheme awards up to five points for each area. It weights identifying factors at 40%, the recommendation at 30% and reasoning at 30%. The pass mark is 60%, with no separate minimum for any area.

AreaMarkWeighted contribution
Identifying factors4/580% × 40 = 32
Recommendation4/580% × 30 = 24
Reasoning2/540% × 30 = 12
Total68/100

Decision: pass. The total exceeds the fictional pass mark, and no area has a separate threshold. The reasoning is still a weakness worth explaining in feedback; it simply does not prevent a pass under these rules.

2. A best-fit rubric

Now imagine the same evidence is assessed without numerical marks. The fictional pass descriptor says that the learner identifies most relevant factors, makes a broadly appropriate recommendation and gives some relevant reasons, although the explanation may be incomplete. The below-pass descriptor describes work where the recommendation lacks relevant support or significant misunderstandings undermine the choice.

Decision: pass, on this fictional rubric. The learner identifies most factors, makes a broadly appropriate choice and gives two relevant reasons. The explanation is incomplete, but the stated pass descriptor permits that. The assessor should record both the evidence supporting the overall judgement and the limitation.

Best fit is not automatically a majority vote or permission to ignore any weakness. Different descriptors could lead to a different decision, and a rubric may also contain mandatory requirements. If the descriptors do not make the borderline clear, seek clarification rather than creating a rule yourself.

3. A scheme with mandatory minimums

Finally, suppose the fictional assessment uses the same weighted total as the first example but also requires at least 50% in each area. The learner has 68% overall but only 40% for reasoning.

Decision: the assessment is not passed. The overall mark cannot override the reasoning threshold. Record the strength of the other work as well as the unmet requirement, then follow the published process for feedback and any further opportunity. Do not assume that an assessment-level outcome automatically determines the result for an entire qualification.

Which approach applies to your assessment?

Ofqual’s 2017 review of apprenticeship assessment plans distinguishes approaches that require specified elements to be demonstrated from those that allow a balance of strengths and weaknesses. It describes both adding individual marks and making a best-fit judgement as possible ways to assess that balance; it also discusses mixed approaches. The review is useful background, not a substitute for the rules of a current assessment. ([assets.publishing.service.gov.uk](https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/660863/Findings_from_Ofqual_s_reviews_of_apprenticeship_assessment_plans.pdf))

For apprenticeship assessments, Ofqual’s current guidance distinguishes mark-based from directly graded assessment and discusses how individual marks or grades are combined. Check the applicable assessment plan, awarding organisation’s specification and assessor guidance for the learner’s assessment. Other qualifications and local assessments will have their own rules. ([gov.uk](https://www.gov.uk/government/publications/apprenticeship-assessment-qualification-level-guidance/apprenticeship-assessment-qualification-level-guidance))

A short decision checklist

  1. Check the applicable documents. Identify the correct assessment, version, mark scheme or rubric, and any published guidance on combining results.
  2. Locate evidence for each criterion. Note where the learner demonstrates the requirement and where the work falls short. Do not infer evidence that is not present.
  3. Apply the decision rule. Calculate the weighted total or compare the work with the appropriate descriptor. Check for mandatory criteria, minimum marks, caps or other stated conditions.
  4. Escalate ambiguity. If the documents conflict or do not explain how to handle the evidence, ask the assessment lead or awarding organisation through the agreed route. Do not invent a threshold or withhold a result indefinitely: record the query and follow it up.
  5. Record and communicate the decision. Include the evidence, rule applied, calculation or descriptor, outcome and any clarification received. Give feedback on the weakness even when the learner passes.

Keep the decision connected to the evidence

For the fictional weighted example, a concise record might read: “Factors 4/5, recommendation 4/5, reasoning 2/5. Weighted total 68/100. Pass threshold 60%; no separate minimum stated. Pass. Reasoning explains cost and delivery but does not address the remaining factors.” Add the relevant scheme version and evidence locations in your own record.

Witful Marking Studio lets assessors review submitted work alongside questions, criteria and evidence, and record marks, criterion outcomes and feedback. The assessor remains responsible for applying the correct rules and making the decision. ([edumark.ai](https://www.edumark.ai/marking-studio))

Sources & further reading

A little less admin. A lot more possibility.

See how Witful connects learning, assessment and your team.

Explore Witful →